Bloom Engineers

Electrical

VA Medical Center - Minneapolis, Minnesota

Radiology Unit Remodel:

Project Manager, Project Engineer for the Architectural, Mechanical and Electrical design for remodeling of the Radiology Unit.
Modify the existing variable air volume system.
Extend the existing medical gas system to new valve boxes and outlets.
Connect new plumbing fixtures to existing water, waste and vent.
Replace the existing lighting system.
Relocate existing power and communication system.

Remodel of Four Existing Patient Care Rooms:

Engineer for Remodeling of Four Existing Patient Care Rooms to TB Isolation Rooms.
Modify the air supply and air exhaust systems to maintain a negative pressure in the TB patient room in relationship to the ante room and the corridor.
Achieve energy conservation through the ability of switching from TB isolation room (negative) to a typical patient room (natural) relationship.
Monitor and alarm room pressure relationships at the nurses’ station.

Remodel of the Existing In-Patient Pharmacy:

Modify plumbing, fire protection, air supply, return and exhaust systems as required for an automated pharmacy dispensing unit.

City of St. Paul - St. Paul, Minnesota

Southwest Maintenance Facility:

A new maintenance facility for the Parks and Recreation Department consisting of an Office area, heated service area, cold storage area, chemical mixing facility, outdoor wash bay and fuel station.
Mechanical systems consist of a water pressure booster pump system providing potable water to plumbing fixtures and maintenance wash down equipment.
Waste from plumbing fixtures and maintenance area drains to be extended to the sewage ejector and pumped to the city sewer.
Office HVAC consists of gas fired supply units containing DX cooling.
Heated Service area heating and ventilating consists of Infra-Red heaters, direct gas fired make-up air unit and exhaust systems.